Unique number that identifies the cluster.
This is mandatory parameter.
Minimum value = 1.
Maximum value = 128.

Amount of time, in seconds, after which nodes that do not respond to the heartbeats are assumed to be down.If the value is less than 3 sec, set the helloInterval parameter to 200 msec
Default value = 3.
Minimum value = 1.
Maximum value = 60.

Interval, in milliseconds, at which heartbeats are sent to each cluster node to check the health status.Set the value to 200 msec, if the deadInterval parameter is less than 3 sec
Default value = 200.
Minimum value = 200.
Maximum value = 1000.

Preempt a cluster node that is configured as a SPARE if an ACTIVE node becomes available.
Default value = DISABLED.

Quorum Configuration Choices - "Majority" (recommended) requires majority of nodes to be online for the cluster to be UP. "None" relaxes this requirement.
Default value = _NSCL_QUORUMTYPE_MAJORITY.

This option is required if the cluster nodes reside on different networks.
Default value = DISABLED.

By turning on this option packets destined to a service in a cluster will not under go any steering.
Default value = DISABLED.

This option enables you to retain existing connections on a node joining a Cluster system or when a node is being configured for passive timeout. By default, this option is disabled.
Default value = NO.

View based on heartbeat only on bkplane interface
Default value = DISABLED.

strict mode for sync status of cluster. Depending on the the mode if there are any errors while applying config, sync status is displayed accordingly. By default the flag is disabled.
Default value = DISABLED.

flag to add ext l2 header during steering. By default the flag is disabled.
Default value = DISABLED.

This field controls the proxy arp feature in cluster. By default the flag is enabled.
Default value = ENABLED.

By turning on this option cluster heartbeats will have security enabled.
Default value = DISABLED.