If the method succeeds, rc is 0 else rc > 0. Values above 0x8000 indicate Warnings.

If the method succeeds, message is NULL else message contains Error/Warning message.

List of routes

The destination network or host.

The subnet mask associated with the network address.

The gateway for the route.

The gateway vlan for the route.

The type of routes to be shown.

Display a detailed view.

Route in management plane.

The name of the gateway for this route. For a route other than a link load balancing (LLB) route, this value is null.

Enable advertisement.

State of the RNAT.

Cost of this route.

Administrative distance of this route, which determines the preference of this route over other routes, with same destination, from different routing protocols. A lower value is preferred.

The cost of a route is used to compare routes of the same type. The route having the lowest cost is the most preferred route. Possible values: 0 through 65535. Default: 0.

The weight of this route.

Routing protocol used for advertising this route.

Internal data of this route.

Internal route type is stored, used for get.

If this route is dynamic, the name of the routing protocol from which it was learned.

Use this option with -dynamic and in a cluster only to specify the set of nodes from which this dynamic route has been learnt.

Whether MSR is enabled or disabled.

Name of the monitor, of type ARP or PING, configured on the Citrix ADC to monitor this route.

The state of the static route. Possible values: UP, DOWN.

The total number of probes sent.

The total number of failed probes.

Number of the current failed monitoring probes.

The code indicating the monitor response.

First parameter used with the message code.

Second parameter used with the message code.

Third parameter used with the message code.

The owner node group in a Cluster for this route. If owner node group is not specified then the route is treated as Striped route.