| getvlanResult Structure Definition |
The getvlanResult structure defines the return type for getvlan API. |
Syntax |
Members |
rc |
If the method succeeds, rc is 0 else rc > 0. Values above 0x8000 indicate Warnings. |
message |
If the method succeeds, message is NULL else message contains Error/Warning message. |
vlanList |
List of vlans |
| vlan Structure Definition |
The vlan structure defines the actual return type values for getvlan API. |
Syntax |
Members |
id |
Integer that uniquely identifies the VLAN for which the details are to be displayed. |
aliasname |
A name for the VLAN. Must begin with a letter, a number, or the underscore symbol, and can consist of from 1 to 31 letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore (_) characters. You should choose a name that helps identify the VLAN. However, you cannot perform any VLAN operation by specifying this name instead of the VLAN ID. |
ipaddress |
The IP address assigned to the VLAN. |
netmask |
Subnet mask for the network address defined for this VLAN. |
linklocalipv6addr |
The link-local IP address assigned to the VLAN. |
rnat |
Temporary flag used for internal purpose. |
portbitmap |
Member interfaces of this vlan. |
lsbitmap |
Member linksets of this vlan. |
tagbitmap |
Tagged members of this vlan. |
lstagbitmap |
Tagged linksets of this vlan. |
ifaces |
Names of all member interfaces of this vlan. |
tagifaces |
Names of all tagged member interfaces of this vlan. |
dynamicrouting |
Whether dynamic routing is enabled or disabled. |
ipv6dynamicrouting |
Whether ipv6 dynamic routing is enabled or disabled. |
ifnum |
The interface to be bound to the VLAN, specified in slot/port notation (for example, 1/3). |
tagged |
Make the interface an 802.1q tagged interface. Packets sent on this interface on this VLAN have an additional 4-byte 802.1q tag, which identifies the VLAN. To use 802.1q tagging, you must also configure the switch connected to the appliance's interfaces. |
sdxvlan |
SDX vlan. |
mtu |
Specifies the maximum transmission unit (MTU), in bytes. The MTU is the largest packet size, excluding 14 bytes of ethernet header and 4 bytes of crc, that can be transmitted and received over this VLAN. |
sharing |
If sharing is enabled, then this vlan can be shared across multiple partitions by binding it to all those partitions. If sharing is disabled, then this vlan can be bound to only one of the partitions. |
partitionname |
Name of the Partition to which this vlan bound to. |
vxlan |
The VXLAN that extends this vlan. |
ownergroup |
The owner node group in a Cluster for this vlan. |
_nextgenapiresource |
interfacE |
taggedinterface |
channel |
taggedchannel |
linkset |
taggedlinkset |
ipv6address |
See Also |